Webcall: Connect any two phones anywhere in the world

You can use ClicknCall's webcall facility to connect any two phones in the world and you don't even need a broadband connection to do that.

1) First log into your member area(from the top right corner of this page).
2) Click on "Webcall" from the left menu after logged in.
3) Enter your own phone number in the first input box, and the destination phone number in the second input box.
Hit "Submit" and your phone will start ringing, once you pick it up we will connect the second leg of the call and the other phone will start to ring and you are connected.

ANI callback

ANI stands for "Automatic Number Identification".
1) Log into our website using your username and password received.
2) Click "ANI Callback" link from the left menu.
3) Enter your home phone 02xxxxxxxx, or mobile phone 04xxxxxxxx then hit "Submit".

Once you setup the CallerID in the above steps you call our access number in Australia. Our system will check the CallerID then disconnect your call (so that you won't be charged by your carrier on this call). If the calling number is in the Caller ID list you register, our system will ring your number in a couple of seconds. When your phone rings just pick it up and you will be prompted to enter the number you wish to dial(the second leg) followed by the "#" key. This way you can enjoy our supa cheap phone rates even without any internet connection. ANI callback is popular with mobile too because you can enjoy the cheap $0.11/min rate to Australian mobile.

Some even use this callback method on their Satellite phones to reduce the call cost!

Note: For callback service there will be two call charges (if both legs are connected). If the second leg is not connected then only the first leg will be charged.

   © copyright 2024 ClicknCall. All rights reserved.